Gallagher i Series Fence Energizer M2800i
Gallagher i Series Fence Energizer M2800i

Gallagher i Series Fence Energizer M2800i

$1,145.99 CAD $1,245.99 CAD

The intelligent i- Series system provides fence information at a glance, informing you of any problems immediately so you can take action to save time and money. The M2800i Fence Energizer has 28 Joules of stored energy and is suitable for fencing all types of animals, on farms up to 300 acres.

Contact Us

  • Green indicator light flashes when energizer is working satisfactorily
  • Red indicator light flashes when energizer has detected a fence fault. Solid red when there is a sudden increase in fence load
  • Split bolt recessed terminals with wire guide for simple and clean wire installation
  • Surface mount technology that delivers superior quality
  • Features high performance adaptive output control technology automatically adjusts to suit your fence conditions while minimizing power consumption. Includes alarms to highlight when fence or earth problems occur
  • Alarms on output, fence and earth voltage alert when voltage is under pre-set levels. Default alarm levels are: output voltage 3kV, earth voltage 500V
  • Advanced lightning protection
  • Self diagnostic ability allowing you to determine the fault in your system quicker
  • RFI (Radio Frequency Interference) suppressed circuitry
  • High tolerance in-built power supply enables successful 230V operation on the poorest performing rural power outlets
  • Short circuit protection to ensure user safety and product reliability if the outputs are directly shorted together
  • Three high voltage terminals for earth, earth reference and fence terminal connections
  • Power supply requirements: 140 to 270 Volt AC, 20 watts
  • Adaptive control will adjust energy levels to maintain 8.0kv output
  • Comes with separate Energizer Controller*
  • Accurately measure fence voltage and current, with arrow showing direction of current flow (fault location). Retrieves and displays alarm status of the energizer and connected zones
  • Energizer can be connected to an Alarm System to notify you if there is a problem on a monitored section of fence should an electric gate be opened or wire cut. Alarm is sent to controller. Alarm System can drive siren and strobe lights (all sold separately)

*Energizer Controller

  • Easily monitor and control fence performance
  • Mount in a convenient location for easy access of fence performance information
  • View fence and zone performance at a glance (zone applies to M1800i and M2800i)
  • Turn energizer ON/OFF from controller
  • Fully waterproof​

Features

  • Green indicator light flashes when energizer is working satisfactorily
  • Red indicator light flashes when energizer has detected a fence fault. Solid red when there is a sudden increase in fence load
  • Split bolt recessed terminals with wire guide for simple and clean wire installation
  • Surface mount technology that delivers superior quality
  • Features high performance adaptive output control technology automatically adjusts to suit your fence conditions while minimizing power consumption. Includes alarms to highlight when fence or earth problems occur
  • Alarms on output, fence and earth voltage alert when voltage is under pre-set levels. Default alarm levels are: output voltage 3kV, earth voltage 500V
  • Advanced lightning protection
  • Self diagnostic ability allowing you to determine the fault in your system quicker
  • RFI (Radio Frequency Interference) suppressed circuitry
  • High tolerance in-built power supply enables successful 230V operation on the poorest performing rural power outlets
  • Short circuit protection to ensure user safety and product reliability if the outputs are directly shorted together
  • Three high voltage terminals for earth, earth reference and fence terminal connections
  • Power supply requirements: 140 to 270 Volt AC, 20 watts
  • Adaptive control will adjust energy levels to maintain 8.0kv output
  • Comes with separate Energizer Controller*
  • Accurately measure fence voltage and current, with arrow showing direction of current flow (fault location). Retrieves and displays alarm status of the energizer and connected zones
  • Energizer can be connected to an Alarm System to notify you if there is a problem on a monitored section of fence should an electric gate be opened or wire cut. Alarm is sent to controller. Alarm System can drive siren and strobe lights (all sold separately)

*Energizer Controller

  • Easily monitor and control fence performance
  • Mount in a convenient location for easy access of fence performance information
  • View fence and zone performance at a glance (zone applies to M1800i and M2800i)
  • Turn energizer ON/OFF from controller
  • Fully waterproof​

Instructions

Video

Open modal